Introduction

There are many garden trellis ideas that you can use, but this is a great option for anyone looking to plant in their backyard without needing to maintain an entire fence line. You’ll need some basic tools and materials before starting your project, but it’s all fairly simple. Follow the instructions below to get started, or check out our video tutorial for even more information about how this trellis works!

Make it easy by starting off with post extenders.

If you’re looking for easy ways to install garden trellis, consider starting off with post extenders. They’re super flexible and easy to use.

Post extenders are exactly what they sound like: a metal extension that fits over the top of your existing fence posts. They make it much easier to attach trellis panels because they provide extra space for attaching the panels after they’ve been placed onto the post extenders (as opposed to being attached before).

Secure your posts and install a section of fencing to hold everything together.

Once you’ve selected your fence posts and driven them into the ground, it’s time to secure them. If you’re using metal posts, this may be as easy as twisting on a couple nuts. For wooden posts, however, you’ll need to drill holes in them first and then secure them with galvanized lag screws or stainless steel bolts (though these can be difficult to find at most home improvement stores).

The easiest way to make this happen is by using a post-drill—an electric tool with a spinning bit mounted on the end of an arm that can be lowered into an open hole so that it drills down through its entire length without having anyone hold it there manually. This causes less fatigue than holding a heavier tool does!

Setting up a fence line

You will need to set posts in concrete. This is an important step, as it will help ensure that your fence remains sturdy and doesn’t move around. Concrete also makes it difficult for anyone to get through the fence, so you can feel comfortable leaving your plants unattended.

Once all of your posts are in place and stable, you can attach a section of fencing to them. Make sure the spacing between each post is equal so that everything lines up properly! Then add trellises to this fence on both sides with brackets or screws; make sure they’re spaced evenly apart as well (more on that later).

Now it’s time for the fun part: adding hardware cloth at ground level helps keep unwanted critters out while allowing water and nutrients into the soil below!

Attach some fencing to the posts.

Now that you have your posts in place, it’s time to attach some fencing to them. Use a drill to secure the posts to the ground and then use a level to make sure they’re standing up straight. Then, use a hammer (or something heavy) to secure the fencing along each post at about eye level. Finally, use a tape measure (a yardstick will also work) to make sure that all of your fencing is straight before planting anything else on it!

Grab your pre-assembled trellises and set them in place, with the panels on top of the fence and the legs and feet on the ground.

• Grab your pre-assembled trellises and set them in place, with the panels on top of the fence and the legs and feet on the ground. You can now attach them to each other by nailing or screwing through holes in each panel.
• If you have a straight post, then simply screw into it at an angle from both sides (if you don’t have a straight post, you can buy one separately).
• Make sure that your trellis is taut when finished by tightening all connections as necessary before attaching any plants to it!

Attach your trellises to each other and your fence to keep everything in place, then add a bit of hardware cloth at ground level for extra security.

To keep everything in place, you’ll want to attach your trellises to each other and your fence. This can be done in a few ways:

• Use bolts and washers through the back of each post and into the adjoining post.
• Drill holes through all four posts, place carabiner clips on either side of the posts (which will hold them together), then insert screws through all four posts, attaching them at ground level with hardware cloth for extra security (so critters don’t get into your garden).

With these few steps you can easily set up a practical planting space that will last for years to come.

Oops! Click Regenerate Content below to try generating this section again.

Conclusion

This is a great way to get your garden on track this year, and I’m excited to see how it turns out for you. If you have any other ideas about how we can make this a better experience for everyone involved in the project, don’t hesitate to send us an email or call us at the office so we can talk about potential improvements. We want everyone who uses our products to be happy with their experience using them.